SteadyMax 25ft. camera security pole.

25ft camera pole 1 2813x5000 - SteadyMax 25ft. camera security pole.

We carry four different heights in-camera security poles, because your application may call for only a 12ft tall pole when someone else needs a 25ft tall poles for longer distances and applications where greater height is required.

The 25ft SteadyMax Camera Pole is tapered from approximately 8” O.D. At the bottom, to 6” O.D. At the top of the pole where the attachment plate is. This pole is an Ultra-Heavy Wall (.250 thick – 1/4”) aluminum tapered round pole using 6063-T6 aluminum, and can be ordered in our usual White or Black (Dark Bronze) Powder Coat finishes. The standard Hand Hole is 18″ from the base, and if you want an extra Hand Hole, it is 5′ from the top of the pole. All poles come standard with the anchor basket, four shims, base nut covers, hand hole cover, and top plate with bolts.

These engineered camera poles also have a Factory-Installed Vibration Suppression System that consists of two different frequency dampeners that quell high and low-frequency vibrations and oscillations that may occur during the life of the pole.

These poles are engineered to withstand 150mph winds with a full load of cameras, cabinets, and sensors, and yet are limited to three percent of movement under those conditions.

We are so confident that you will get a long lifetime of rust-free use from these super strong poles that we back them with a 20-year structural integrity warranty (3 years finish and material warranty all warranties are limited to replacement and/or repair).

For more information on the 25ft SteadyMax Camera Pole, contact one of our Sales Engineers toll-free 844-669-3537 or stop by our website at strongpoles.com.