We have the right pole for your project.

20footSMBronze 2 2813x5000 - We have the right pole for your project.
20′ SteadyMax Camera Pole

Security equipment dealers, Integrators or installers need to have the proper camera pole for their equipment. The best pole for areas like parking lots, wide-area surveillance and long-distance applications is going to be the 20′ SteadyMax Camera Pole.

The 20′ SteadyMax Camera Pole is a round tapered pole, and is approximately 8” O.D. at the bottom, and tapers down to 6” O.D. At the top of the pole where the attachment plate is. This pole is heavy wall (.156 thick) construction, using 6063-T6 aluminum and can be ordered in our usual White or Black (Dark Bronze) Powder Coat finishes. The standard hand hole is 18″ from the base, and if you want an extra hand hole, it is 4′ from the top of the pole.

These engineered camera poles also have a Factory-Installed Vibration Suppression System that consists of two different frequency dampeners that quell high and low-frequency vibrations and oscillations that may occur during the life of the pole.

These poles are engineered to withstand 150mph winds with a full load of cameras, cabinets, and sensors – yet are limited to 3% of movement under those conditions.

We are so confident that you will get a long lifetime of rust-free life from these super strong poles that we back them with a 20 Year Structural Integrity Warranty (3 Year finish and material warranty – all warranties are limited to replacement and/or repair).

For more information on the 20′ SteadyMax Camera Pole, contact one of our Sales Engineers toll-free 844-669-3537 or stop by our website at strongpoles.com.