Mounting Platforms

rrmount with wrap around and birdhouse 1 - Mounting Platforms

Strong Poles design mounting platform to have more room to install your Pan Tilt Zoom camera and other pieces of equipment; the 8×10 Mounting Platform (Birdhouse) with the RRMount (part # SP-RRMountBH) or the Wrap Around Mount with the RRMount (part # SP-RRMountWrap) are two examples. 

The 8×10 Mounting Platform (Birdhouse) with the RRMount (part # SP-RRMountBH) is an aluminum box installed on the top of our four-inch Classic Square Camera Poles or the SteadyMax Poles. It is extremely heavy-duty, as it is made from 3/16inch aluminum, and 3 of the faces have pre-drilled 1inch Electrical Knockout holes for wiring access (actual hole size is 1.362inch). They will accommodate any type of 1inch conduit fitting, wire gland, or LiquidTite fittings. These holes come sealed with weatherproof rubber hole plugs that can be cut to allow wiring to pass through or be removed quickly if you are installing a gland or fitting. Adding the RRMount to one side of the Birdhouse gives you a flat vertical platform for the Pan Tilt Zoom Camera, providing a stable platform for good video surveillance. 

The Wrap Around Mount with the RRMount (part # SP-RRMountWrap) is a stable aluminum mount that can be installed at any height on our Steady Max Poles. The front is 9inch wide, the two sides are an 8inch wide, and the height is 11inch; all three sides have 1.500inch holes pre-drill to accommodate any type of 1inch conduit wire gland or liquidtite fitting. These holes come sealed with weatherproof rubber hole plugs that can be cut to allow wiring to pass through or be removed quickly if you are installing a gland or fitting. Adding the RRMount to one side of the Wrap Around Mount gives you a flat vertical platform for the Pan Tilt Zoom Camera, providing a stable platform for good video surveillance. 

To get more information on the mounting platforms, contact one of our Sales Engineers toll-free at 844-669-3537 or stop by our website at strongpoles.com.