Tag Archives: Camera pole

The SP-DB20 Direct Buriable 5″ Square Camera Pole.

Utilities, Developers, and Contractors can benefit from the saving associated with the highest quality, longest-lasting, and lowest maintenance of a Direct Buriable 5″ Square Camera Pole. The SP-DB20 is perfect for parking lots, wide-area surveillance, and long-distance applications. Design for a 5′ bury depth and 20′ above ground height. With the ease of installation, this […]

The SP-DB11 is a Direct Burial 5 inch square camera and lighting pole.

With a buried depth of 4ft and an above-ground height of 11ft, SP-DB11 is an excellent alternative to the traditional anchor-based poles. With an embedded pole (direct buriable pole), you can save on expense and time. Eliminates the need for foundations, requiring no Civil Engineer and no PE stamp, resulting in cost savings of $300 […]

Our original design, the 8ft by 4in square classic security camera pole.

Built strong to provide a sturdy, steady security mounting platform, the 8ft by 4in classic camera pole is made out of special aerospace aluminum with internal corner tubing shafts molded-in for even more strength. The 8ft tall poles are perfect for wall mounting or parks, pedestrian areas, gates, or even entry/exit points. Design by security […]

Five-foot four-inch classic square camera pole

The StrongPoles team, with the calibration of Security Installers, has designed a 5-foot 4-inch square camera pole that is built out of special aerospace aluminum that results in a lighter pole, yet will support heavier loads. The patented “NO WELDS” technology yields more inherent strength than any other pole, with internal corner tubing shafts molded […]

SteadyMax 25ft. camera security pole.

We carry four different heights in-camera security poles, because your application may call for only a 12ft tall pole when someone else needs a 25ft tall poles for longer distances and applications where greater height is required. The 25ft SteadyMax Camera Pole is tapered from approximately 8” O.D. At the bottom, to 6” O.D. At […]

More Rigidity – Less Camera Shake in high winds

Our engineers have designed the 16ft security camera pole for surveillance and security applications, such as license plate recognition, gates, and pedestrian entry/exit points, etc. Each 16 ft SteadyMax is pre-treated before anodizing and powder coating with a unique four-stage chromate conversion process that smooth’s and etches the surface and are designed to need minimal […]