Direct buriable poles can be used or substituted in many applications. Our Direct Buriable 5″ square camera pole, the SP-DB25, is used for easier installation, cost, and time savings. They eliminate the need for expensive anchor base footing and bases. The advantages of using aluminum are corrosion resistance, low maintenance, and lightweight. Built out of […]
Utilities, Developers, and Contractors can benefit from the saving associated with the highest quality, longest-lasting, and lowest maintenance of a Direct Buriable 5″ Square Camera Pole. The SP-DB20 is perfect for parking lots, wide-area surveillance, and long-distance applications. Design for a 5′ bury depth and 20′ above ground height. With the ease of installation, this […]
The SP-DB16 (20ft) is part of our series of Direct Buriable 5″ Square Camera Poles. With overall length being 20ft so you have 4ft of bury depth and 16ft above ground height. The 5″ square design allows camera mounting direct to the pole and prevents twisting once installed. The Direct Buried alternative for any application, […]
The StrongPoles team, with the calibration of Security Installers, has designed a 5-foot 4-inch square camera pole that is built out of special aerospace aluminum that results in a lighter pole, yet will support heavier loads. The patented “NO WELDS” technology yields more inherent strength than any other pole, with internal corner tubing shafts molded […]
Currently, we build three main heights of security poles in the 4″ Square Pole series. They are made out of special Aerospace Aluminum, with this material your pole will have a long lifetime of rust-free life. We back it with a warranty of 20 Years Structural Integrity Warranty (3 Years finish and material warranty-all warranties […]
Here are some of our recommendations for the foundation and anchor assembly for our Security Camera Poles, a proper foundation will ensure the longevity of your pole. The foundation should be concrete (for precise depth and width consult a foundation engineer). To help streamline the construction schedule, we have three sizes of Concrete Forms. The […]
Our second generation of security camera poles, the SteadyMax Series, we are now manufacturing is the most rigid poles in the world. Our engineers have designed these poles to reduce the amount of movement and shake commonly found with many light poles. How did we do this you ask? By providing a factory-installed Vibration Suppression […]
Strong Poles Factory Installed Vibration Suppression Systems Strong Poles is constantly looking for ways to make our SteadyMax Security Camera Poles more rigid and more steady in any wind condition. Normally when you think of a pole shaking in the wind, it is from very high winds. However, most destructive pole vibration actually happens […]
Security Camera Poles with Bolt-On Masts for Transmitters and All Type of Antennas are now available from Strong Poles. Strong Poles is committed to providing additional options for wireless antennas and technologies.
Using Strong Poles built for Security Cameras, solves a whole host of problems with using existing light poles and hose clamps for your Security Cameras, sensors and detectors. Whether wired or wireless, Strong Poles provide a purpose-built solution to your security installations. Designed by Security Installers to fit any technology, any brand. Security Camera Poles are long overdue in the making.