Cam Blox

No Drill Solutions for Mounting Cameras on Existing Infrastructure

“Drill into our Cam Blox, and not your Clients’ Facility.”

 These Cam Blox Mounting Platforms will provide everything you need to mount cameras indoors in most tilt-wall and big-box structures. In most cases, in under a minute, you can have a complete Camera Mounting Platform with a built-in Junction Box.

  As you may know, it is dicey and often not permitted to drill holes in concrete tilt-wall structures or drill into the beams at the ceiling. So we have made it much easier to quickly mount single or multiple small cameras on our innovative Cam Blox.

  You can choose a Beam Clamp type, a Pipe or Conduit Clamp, or even a Pipe Drop model connected directly to Pipe Drops or onto a Pipe Drop Accessory.

  The Cam Blox boxes not only provide a quick way to mount any cameras, but the aluminum boxes are thin enough to make drilling mounting and access holes super-fast.

  The Cam Blox boxes can also be used as a handy Junction Box for wiring and can also house extenders, injectors, or other devices. The End Caps that are included are easy to put on or take off.  

  Beam Clamp type:  This quick-attach attachment will make mounting any Cam Blox to any existing beam fast and easy. 

These Beam Clamps use a 14” long section of Strong Strut and come complete with 2 Beam clamps that can accommodate any Beam up to 11’ wide.

Pipe or Conduit Clamp type:  These innovative Clamps allow you to utilize any pipe or conduit in the facility (including anywhere along our own Pipe Drop Sections) to quickly attach a Cam Blox you will instantly have a Camera Mounting Platform ready to use. These Pipe Clamps will connect to any pipe or conduit between 1-1/2” and 2-1/2” outside diameter (OD).

Pendant Mount type:  This type of mount attaches to any of our 1-1/2” Pipe Sections, or onto any 1-1/2” threaded accessory, and has twin set screws to keep the box oriented correctly and tightly. (cannot be used“inline” of Pipe Drop Sections. Must be used alone, at the end of a Pipe Drop, or attached to an accessory)

All Mount Styles are available in these sizes:  (in Black or White)

Single Wide width (8x8x3 inches)

Double Wide width (8x8x12 inches)

Triple Wide width (8x8x16 inches)

To get more information on the Cam Blox mounting platforms, contact one of Sales Engineers toll-free 844-669-3537 or stop by our website at