More than one way to mount your devices with limited space.

corner and flat mount

When you have limited space and need to install security devices, we have some stand-alone camera mounts for that. The Corner and Flat Mount are designed not only to give you three different faces for camera mounting but also gives you a handy junction box enclosure for wiring, POE injectors, lightning resistors, etc.

Sometimes you don’t have the room for a pole, so we here at StrongPoles developed the Corner and Flat Mount that can be used inside or outside and at any height. The front face is 4 inches wide and 7 inches height the side faces are 6 inches wide and 6 inches height with the junction box enclosure 4 inches by 4 inches and a 7 inches depth. The mounting plates are 3 inches wide by 6 inches height; the Corner Mount has an opening of 7.9 inches to fit corners, the Flat Mount plates are designed to be installed on any wall.

The caps on the top and bottom of the junction box portion can also be easily drilled for holding conduit connectors or liquid tight connectors. In fact, this all aluminum corner mount can be easily drilled anywhere for access holes, mounting screws or conduit fittings.

For more option on these corner mount for camera, you can contact one of our Sales Engineers here at StrongPoles toll-free 844-669-3537 or stop by our website.