– and –
NOW we are bringing you the NEW INDOOR MOUNTING and SUSPENSION with many “NO DRILL” options.
There are five different types of ceiling mounts to begin designing your suspension components.
Pendant type ceiling mount: This cast aluminum type of support, when used alone, comes complete with concrete anchors if you are attaching your suspension components to a concrete ceiling. You can source some lag screws if you will be securing these to a wood beam. Ideally, this mount would be bolted to a steel plate or beam with bolts. This type is limited to suspending 200lbs total weight.
Egyptian type ceiling mount: This strong steel Egyptian style ceiling mount is used in quite a few of our pipe drop suspension types and can be found paired with a pipe clamp, a Strong Strut beam clamp, and others.
The Egyptian style ceiling mount can be used in many ways, such as
- attach it to an existing piece of the strut,
- use with lag bolts to attach it to a wood beam, or
- bolt it onto a steel plate or beam.
This mount is limited to suspending 250lbs total weight (no bolts provided).
Beam Clamp with Egyptian mount attached: This beam clamp uses the steel Egyptian ceiling mount, which holds a little more weight 250lbs than the pendant type (200lbs). This quick-attach attachment will make the mounting pipe and suspension components quick and easy. These Beam Clamps use a 14″ long section of Strong Strut and come complete with 2 Beam clamps that can accommodate any beam up to 11″ wide.
Beam Clamp with Pendant mount attachment: This quick attach beam clamp with a cast aluminum pendant mount will suspend a total weight of 200lbs. This mount will make mounting pipe and suspension components quick and easy. These beam clamps use a 14″ long section of Strong Strut and come complete with 2 beam clamps that can accommodate any beam up to 11″ wide.
Pipe and Conduit clamp with Egyptian mount attached: These innovative aluminum clamps allow you to utilize any heavy-duty pipe or conduit in the facility to start a short chain of suspension components quickly. Be very careful that the pipe or conduit you are attaching to will support the total weight you will be hanging from it. A thick wall or schedule 80 pipe is better. Pipe clamps will attach to any pipe or conduit between 1 1/2″ to 2 1/2″ outside diameter (OD). The total weight of all suspended equipment should not exceed 200lbs.
For more information on the ceiling mounts, contact one of our Sale Engineers toll-free 844-669-3537 or stop by our website at strongpoles.com.