Monthly Archives: May 2020

Dual Dome/Bullet Adapter

This dual dome/bullet adapter fits onto any Strong Poles Accessories that have a 1-1/2″ NPT fitting (examples:  Fly-Out, Reacher, Parapet Mount, Any PTZ Mount with 1-1/2″ NPT Fitting). The Circle Plates on each side can hold various cameras, such as 180-degree Panoramic Cameras, Bullet Cameras, Dome Cameras, Sensors, etc. The body of this attachment has a removable door and a […]

Dome Mount for Fly-Out/Fly-Over

Strong Poles has introduced a new dome camera mount designed to screw onto our stylish “Fly-Over or Fly-Out Camera Mounts.” This round mount can accommodate virtually any dome camera on the market—the 6” round mounting plate design for the camera and the 1″ diameter hole for the wire harness to pass through. With the mounting plate being aluminum, it makes […]

Antenna Top Mount Mast

Strong Poles is committed to providing additional options (bolt-on mast) for wireless antennas and technologies. Installers have traditionally mounted antennas to existing light poles by any means possible. Still, they have encountered difficulties because the pole sometimes blocks part of the signal – especially for omnidirectional antennas. Most of these antennas are designed to quickly […]

Antenna Mast (for Birdhouse)

Strong Poles is committed to providing additional options for wireless antennas and technologies. Installers have traditionally mounted antennas to existing light poles by any means possible. Still, they have encountered difficulties because the pole sometimes blocks part of the signal – especially for omnidirectional antennas. Most of these antennas are designed to quickly mount on […]

8″ Square Pedestal (for Pole Top)

Strong Poles has responded to installers asking for top mount pedestals to mount small and large format PTZ cameras, Thermal cameras, Beacons or Strobe Lights, and other security devices. In response, we have introduced three bolt-on top-mount pedestals that will allow mounting of any top-mount PTZ camera or security device. The Square top-mount Pedestal has an 8” square […]

8 X 10 Mounting Platform (Birdhouse)

Birdhouse 8 X 10 Mounting Platform This 8” x 8” x 10” Bolt-On Mounting Platform, also known by our Dealers as “The Birdhouse,” has been used in many different ways, but is designed to provide four long, broad mounting faces for large, heavy PTZ Cameras, Equipment Cabinets, Power Supplies, Transmitters and Antennas and a myriad of Security Detectors, Sensors, […]

6×6 Junction Box

This handy bolt-on accessory is a 6”x 6”x 4” Junction Box that can be used in many different ways. It can be used merely as a junction box to give installers more room to make connections, connect camera surge protectors inline, or even to nest a small POE injector. The outside faces can be used to mount […]